Need Help? Ask The Expert Call us today on +44 (0)1236 459 020

Optomax Digital – LLT500D3L

Optomax Digital

Optical liquid level switch
  • Low in power
  • Low in cost
  • Compact design

Downloads

Ask the Expert

[row][column size=”one-half”][checklist style=”arrow”]

TECHNICAL SPECIFICATIONS

Supply Voltages (Vs) 4.5 to 15.4Vdc
or 4.5 to 5.5Vdc (PWM Output)
Supply Current (Is) 2.5mA max. (Vs = 15.4Vdc)
Output Sink and Source Current (Iout) 100mA
Operating Temperatures Standard: -25 to +80°C
or Extended: -40 to +125°C
(Above +85°C Trogamid is suitable for use in water based liquids, oil based liquids can cause deformation of the sensing tip and must be tested for compatibility)
Storage Temperatures Standard: -30 to +85°C
or Extended: -40 to +125°C
Housing Materials Polysulfone (Standard)
or Trogamid
Sensor Termination 24AWG, 250mm PTFE wires, 8mm tinned
Operating Pressures 0 to 20bar (M10x1 thread)
or 0 to 7bar (All other threads)

[/checklist][/column][column size=”one-half”][checklist style=”arrow”]

OUTLINE DRAWINGS

Sensor mounted from inside vessel (M10x1 thread)

liquid-level-digital_dwg_inside

Sensor mounted from outside vessel (M12x1,1/2″ SAE and 1/4″ NPT threads)

liquid-level-digital_dwg_outside

[row][column size=”one-half”][checklist style=”arrow”]

OUTPUT VALUES

Output Voltage (Vout): Iout = 100mA
Output High Vout = Vs – 1.5V max
Output Low Vout = 0V + 0.5V max
PWM Output
Duty Cycle in Air 25% ± 10%
Duty Cycle in Liquid 75% ± 10%
Frequency 2kHz ± 10%

[/checklist][/column][column size=”one-half”][checklist style=”arrow”]

ELECTRICAL INTERFACE

Wire Designation
Red Vs
Green Output*
Blue 0V

*See part numbering guide for output logic

white

ce-mark-2 rohs-icon-2

[row][column size=”one-half”][checklist style=”arrow”]

FEATURES

  • Reverse polarity, ESD and transient over-voltage protected
  • Wide supply voltage range
  • Push-pull output, capable of sinking or sourcing up to 100mA, can directly drive small loads
  • Optional fail-safe PWM output
  • Standard and extended temperature ranges available
  • Polysulfone or Trogamid housing material options
  • Internal or external mounting options
  • High pressure option available

[/checklist][/column][column size=”one-half”][checklist style=”arrow”]

BENEFITS

  • Solid state so no moving parts to cause unreliability
  • Small in size so they can be installed in applications where space is limited
  • Can detect tiny amounts of liquid when positioned correctly, ideal for leak detection
  • Fast response time
  • Repeatable switching point
  • Built-in output delays available on request for applications where sloshing causes intermittent switching
  • Very robust permitting use in a wide range of fluids and chemicals

[row][column size=”one-half”][checklist style=”arrow”]

OPERATING PRINCIPLE

Liquid sensing 001_450

When in air the infrared light is reflected back to the detector

[/checklist][/column][column size=”one-half”][checklist style=”arrow”]

 

Liquid sensing 002_450

When in liquid the infrared light is refracted and the output switches

  • This field is for validation purposes and should be left unchanged.