|
This is a new low cost version of the Liquid Level Sensor. It is currently only available in the standard temp range. We offer 2 versions of this product: a fully protected sensor or a simple model without the circuit protection for use in low cost applications. The customer can integrate the electronics into their system. The product has a 10mm diameter housing. Alternative/threaded mounting styles are available on request. Product Specification Parameter
| Value
| Sensor Type
| Basic Sensor
| Operating Temperature Range
| -25oC to 85 oC | Storage Temperature Range
| -50oC to 150 oC (-58 oF to 302 oF)
| Housing Material
| Polysulphone | Housing Type
| Cylindrical Probe | Supply Voltage
| 5.0Vdc to 12Vdc
| Output Type
| High in air
| Application Type
| Variable
| Termination Type
| Connector/cable options available
| Seal Washer
| options avaialble
| Stainless Steel Nut
| No
| Cone Type
| Cone type
| Thread Dimension
| No thread or M10 fine
| Hex Dimension
| None
| Pressure Range
| 25 bar max
| Supply Current
| 50mA max.
| Output Sink Current
| 40ma
| Repeatability
| 1mm (0.04in)
| Hysteresis (dependant on liquid)
| 1MM (0.04in)
| Response Time
| Falling: 1s max (in ethanol)
Rising: 50uS
|
LLC100A
| 3 wire – analogue output
| LLC100B
| 4 wire – analogue output
| LLC200A
| 3 wire – digital output
| LLC200B
| 4 wire – digital output
|
Product Price is volume dependant. higher volume above 2000 units £1.50 to £6 ($2.55 to $6.80) depending on the requirements high volume above 5000 units £1.00 to £3.00 ($1.70 to $5.0)
|
