|
The 1GT101DC-Con can be fitted with any connector or cable style you require. The product will be fully teated and approved to meet the requiremnts of your application. Product Specifications | | Product Type | Hall-Effect Gear Tooth Sensor | | Package Style | Plastic Probe | | Supply Voltage | 8.0 Vdc to 16.0 Vdc (21-32Vdc available in model GTN1A211) | | Output Type | Sink | | Termination Type | AMP 3-Pin Connector | | Operating Temperature Range | -40 °C to 125 °C [-40 °F to 257 °F] | | Output Voltage | 3.2 Vdc max. (@ Io=3 mA) | | Vibration | DIN IEC 68-2-6 | | Salt Spray | 96 hours per DIN 50021 | | Temperature Shock | 250 oil-to-oil shock cycles between 20 °C and 125 °C | | Vane and Geartooth Target Material | Cold Rolled Steel, 1018 or Low in Carbon (Annealed) | | GT Target RPM | 15 RPM min., 3600 RPM max. | | Switching Time Rise (10 % to 90 %) | 30 µs max. | | Switching Time Fall (90 % to 10 %) | 5.0 µs max. | | Operate Point | 2.75 ° ± 1.5 ° | | Release Point | 3.0 ° ± 2.50 ° | | Sealing | IP67, IP68 | | Availability | Global | | Comment | Values measured using pull-up resistor; 1 millitesla (1 gauss x 10-1), and gear-tooth target dimension. | | Series Name | GTN Series | | Supply Current (max. @ 25 °C) | 40 mA | | Output Current (max.) | 15 mA | | GT Target Min Tooth Height | 5.06 mm [0.200 in] | | GT Target Min Tooth Width | 2,54 mm [0.100 in] | | GT Target Min. Tooth Spacing | 10,16 mm [0.400 in] | | GT Target Thickness | 6,35 mm [0.250 in] | | GT Target Diameter | 101,6 mm [4 in] | | GT Airgap | 1,02 mm to 2,03 mm [0.040 in to 0.080 in] | | Probe Length | Various See Order Guide Above | | Manufacturer | Honeywell Control Systems |
|
