|
RPN Series Hall Effect Rotary Position Sensors use a magnetically biased Hall effect integrated circuit (IC) to accurately sense rotary movement of the actuator shaft. This IC, together with conditioning and protection circuitry and two permanent magnets, is sealed in a rugged package.
Rotation of the actuator shaft changes the Hall effect IC's position relative to the magnets. This results in a change in the flux density detected by the Hall effect IC as the shaft is rotated. The output of the IC is converted to a linear output over 90° of travel.
The sensor is flange mounted with two easily accessible mounting holes. Connection is by AMP Superseal 1.5 Series. Manufactured by Honeywell and ASG Product Specifications | | Product Type | Hall-Effect Rotary Position Sensor | | Package Style | Plastic Housing | | Supply Voltage | 10.0 Vdc to 30.0 Vdc | | Output Type | Linear Voltage: 0.25 Vdc to 4.75 Vdc | | Termination Type | AMP 3-Pin Connector | | Operating Temperature Range | -25 °C to 85 °C [-13 °F to 185 °F] | | Output Voltage | 0.25 Vdc to 4.75 Vdc | | Linearity (% of Span) | ± 2.5 ° | | Sealing | IP67 | | Availability | Global | | Comment | Resistant to short circuit connection and has reverse polarity protection. | | Measuring range | ± 45 ° | | Mechanical angle of rotation | 360 ° | | Accuracy | ± 0.5 ° | | Load Resistance | 5 kOhms min. | | Actuation | RPN 1A111 - Plastic Lever Fitted to Shaft
RPN 1A112 - 6 mm diameter plain shaft | | Series Name | RPN Series | | Supply Current (max. @ 25 °C) | 15 mA |
|
