KGZ10 Series sensors are small, flange mounted sensors, available as KGZ10 with spade terminal connections and KGZ1-0SP with stainless steel leadwires. These sensors are small, reliable, simple to operate and can be incorporated in controllers of varying complexity.

Unlike most oxygen sensors KGZ10 Series sensors do not require a reference gas, accurate dosing or a calibrated leak. They can be calibrated in normal ambient air and, in microcomputer-controlled systems, they can be automatically tested and recalibrated - important safety features.

KGZ10 Series sensors are high-accuracy oxygen sensors suitable for many applications. The sensor employs two ZrO2 discs with a small hermetically sealed chamber in between. One of the discs functions as a reversible oxygen pump, which is used to successively fill and empty the chamber. The second disc measures the ratio of the partial pressure difference and generates a corresponding sense voltage. A heat element produces the 700 °C required for the ZrO2 to operate as an O2 pump. The time taken for the pump to achieve specific minimum and maximum pressures within this chamber is a measure of the partial oxygen pressure of the environment.

KGZ10 Series sensors have to be operated by an electronic measuring circuit that controls the sensor operation and signal processing. This circuit can either be incorporated into the customer’s own electronics, or be purchased as a separate interface board from SST.

FEATURES
• High-accuracy measurement
• Low power consumption
• No reference gas required
• Linear output signal
• No need for temperature stabilization
• Function testing and calibration in ambient air
• Long life

TYPICAL APPLICATIONS
• Heating boiler control
• Industrial process control
• Control of aircraft on board oxygen generation systems
• Automotive exhaust gas diagnostics
• Service instruments
• Monitoring environmental oxygen